ATOMIC SV2 FLEX
$99.95
-
ATOMIC made a real effort to reinvent the snorkel. The SV snorkels have an internal tube with a one way scupper flap located inside the lower part of the snorkel. It works much like the scupper valve of a boat. Air needs to go through this piece of internal tube before reaching the mouthpiece. Any water entering the top of the snorkel (1) bypasses the mouthpiece completely and can be easily expelled through the purge valve (4). If water did enter the internal tube (2), the small one-way scupper flap valve (3) would allow water to flow past the mouthpiece and out the purge valve (4) without collecting at the bottom of the breathing passage. The diver simply exhales a small burst of air to clear any water trapped below the mouthpiece, and the internal tube airway is kept dry.
The SV2 FLEX has semi-dry top with horizontal vents engineered to diffuse splashed water that would normally freely enter the snorkel top. The small gaps between the vanes of the vent restrict water speed and droplet size and permit most of the splashed water to exit the special vents without entering the breathing tube. The end result is less water in your snorkel. The SV2 is perfect for rough or choppy water conditions.The flexible lower section drops the mouthpiece out of the way when not in use. The dual silicone mouth piece prevents over-clenching of teeth that would restrict airflow.
Our personal note: we find all snorkels of the ATOMIC SV series to be the easiest to clear snorkels. No more tiny water drops entering your mouth with every breath. If any snorkel can be called dry, then it's the ATOMIC SV series, no matter if you choose an open or semi-dry design. -
- Type: semi-dry snorkel design
- Internal scupper valve design to keep airway dry
- Attachment: quick-connect clip
- Flexible lower tube
- Mouthpiece: silicone, non-exchangeable
- Available colors - all clear, black/red, black/yellow, black/blue, black/silver, black/pink, black/purple
- Warranty: 1 year limited manufacturer’s warranty
- Ships within: 1-7 business days
Related Items
ATOMIC BLADE FIN
$249.95
-
The BC1 redefines traditional BC design. Every detail was reexamined. Every material and component was rethought. The new Atomic BC1 is designed for the diver who wants the absolute BEST available.
ATOMIC AQUATICS BladeFins uniquely combine two structural frame designs used in aircraft and Indy race cars. They capture water and contain the flow without spilling it over the edges. The flow of water is channelled down the blade and off the vertical stabilizer edge tips to deliver the power and thrust that only a paddle fin design can provide. The vertical stabilizers on fin tips keep the fin tracking straight up and down with every kick all the while the 2-frame design fully optimizes the paddle fin design and kicking effort.
EZ-LOK Buckle System: easily snap the buckle on and off and be confident that it will not release accidentally. Buckles rotate 180 degrees and straps adjust with a simple pull.
Our personal note: you can easily see the difference between the BladeFin and the X1 BladeFin: look at the amount of high quality black silicone used vs. the lower quality material, the coloured plastic. The BladeFin has way more of the expensive silicone material. This helps to bend the fin more in the middle thus to capture more water with every kick and provide more forwards power. Now look at the X1 BladeFin: you will see much less of the high quality silicone is used resulting in a heavier fin that is capturing less water. You will need more effort to produce the same power. -
- Fin type: open heel to use with boots
- Material: dual-composite fin blade
- Blade type: flexing blade
- Heel strap: adjustable, quick-connect swivel buckles
- None-skid footplate
- Available colors: blue, yellow, silver, red, pink, purple
- Available sizes: S (men's US 5.5), M (6-8.5), L (9-11), XL (11.5-13)
- Warranty: 1 year limited manufacturer’s warranty
- 1. Power-Loop Monocoque Structure: the engineering term Monocoque means “singleshell” utilizing the external skin to support most of the load area while power is applied through the frame rails.
2. Foot Pocket Power Plate: the Power-Loop Monocoque structure is connected to the sole plate (Power Plate) giving divers a solid feeling like the fin is “bolted” to the foot.
3. Power Rail: the frame rail design on each side of the fin mimics a backbone or spine connecting to the Monocoque.
4. Vertical Stabilizers: oversized stabilizers at fin tips keep the fin tracking straight up and down. - Ships within: 1-7 business days
Atomic product registration
ATOMIC FRAMELESS
$179.95
-
The Atomic Aquatics frameless mask focuses on fit, comfort, and a wide field of vision. The large lens and snug skirt work in harmony to possibly create the widest viewing angle of any frameless mask design.
Comes with a compact travel case for easy transport.
-
- Mask type: single lens design
- Recommended use: diving, snorkelling
- Available in 2 sizes: standard, medium fit (for smaller faces)
- Mask skirt: black or clear silicone, double-sealed
- Strap attachment: quick-adjust buckle
- Glasses: optical quality, distortion-free UltraClear lenses, tempered glass
- Corrective lenses: available (ranging from -1.0 to -8.0 in .5 diopter increments)
- Available colors - clear or black ; red, pink or purple
- Warranty: 1 year limited manufacturer’s warranty
- Comes with a low profile box
- Ships within: 1-6 business days
© 2024 getwetcanada. Powered by Shopify
