XDEEP STEALTH 2.0 TEC
$905.00
This system was designed having the needs of extended cave penetrations and decompression divers in mind. It is perfectly capable of supporting multiple stages while still being streamlined even when fully inflated.
Made of extra durable 1100 Dernier TEX Cordura produced in Germany, the upper part of the bladder is reinforced to provide protection where it is most needed. The inner shell is coated with an antibacterial layer that doesn’t wash off for long lasting health protection.
Need a back up? The XDEEP STEALTH 2.0 TEC is available with a redundant bailout bladder: the STEALTH 2.0 TEC RB. The corrugated inflator hose can be installed on the left or right side of the BC. The dump valve is conveniently placed at the center of the bottom part of the wing. No need to roll on the side when releasing air, which is a great convenience when diving with multiple stages.
Another advantage of the XDEEP STEALTH 2.0 TEC system is the availability of different weight components. It comes standard with a Central Spine Weight Pocket that holds 4 x 2.5 kg (6 lbs). The pocket can be moved higher or lower on the harness to achieve perfect trim. The Central Spine Weight Pocket is also available in a 2 x 1.5kg, 4 x 1.5kg or 8 x 1.5kg version. Further you have optional trim pockets that can be added either on the shoulder or waist strap: 2 x 1.5kg or 2 x 3kg.
Even the harness shows that a lot of practical experience was put into this design. The crotch webbing is super soft to minimise abrasion of your suit where a lot of movement happens while the waist webbing is rigid to ensure your attached tanks stay exactly where you’ve clipped them. The soft shoulder straps perfectly mould to your body providing a comfortable fit.
All parts of the harness can be adjusted independently from each other. Shortening the shoulder strap does not change the position of your waist D-Rings.
-
- Type: sidemount harness with wing
- Type: sidemount harness with wing and weight system
- Use: multistage dives
- Double shell construction
- Outer shell: 1100 dTEX Cordura (produced in Germany; outer side coated with Teflon aperture, inner side with polyurethane)
- Butt plate: optional<
- Inner air-cell material: 440 dTEX Nylon
- Inner shell coated with antibacterial agent, safe for people. Doesn’t rinse off, permanently adheres to material
- Lift: 41lbs/19kg
- Recommended max. amount of cylinders: 8
- Bailout bladder: optional
- Corrugated hose: 16-inch/30.4 cm with inflate/deflate valve (K-type inflator)
- Right inflator port for the optional installation of the inflator hose from the right side
- Exhaust valves: 1 pull-dump valve at the center, bottom;
- Cylinder attachment: through adjustable bungee system (continuous or divided bungee) at chest area, stainless steel D-rings in the back of the waist belt and/or movable rubber D-rings
- D-rings: 2 angled D-rings shoulder, 2 D-rings crotch strap, 2 attachment plates and 2 movable rubber D-rings on waist strap
- Central Spine Weight pockets: 4 x 5.5lbs/2.5kg
- Trim pockets: optional, 2 x 3.3lbs/1.5kg or 2 x 6.6lbs/3kg
- Weight: BC + harness 6.2lbs/2.8kg, BC only: 4lbs/1.8kg
- Colour: black
- In the box: STEALTH 2.0 TEC sidemount harness and BC with hardware, set of bungees and standard Central Spine Weight Pocket, user manual
- Ships within: 2-8 business days
- Useful links:
XDEEP Stealth 2.0 TEC user manualContact us for a quote on more XDEEP products.
Related Items
DIVE RITE TRANSPLATE HARNESS
$189.99
- A hybrid harness designed for divers who want the support of a backpack-style harness for better weight-load distribution, yet wish to dive a hard metal backplate.
Designed like a mountaineer's backpack, the TransPlate harness disperses weight across the hips and back, minimizing shoulder strain. When used with a 6-pound steel backplate, divers can remove or minimize weight.
Adjustable straps adapt to a wide variety of exposure suits, that means easy donning and doffing. Marine grade stainless steel base plates allow for proper placement of the shoulder straps. The plates can be moved forward or backward on the waist strap to get the best fit and performance. The modular design allows for customization with a wide variety of pockets and accessories. Available in sizes M - XXL.
Includes webbing, buckles and marine-grade stainless steel hardware. Does not include backplate, crotch strap and cam straps. -
- Type: padded nylon webbing harness with backplate
- Webbing width: 2"/5cm (1"/2.5cm for sternum strap)
- Webbing strength: 2"/5.1cm webbing - 7000lbs/3175 kg, 1"/2.5cm webbing: 2200lbs/998kg
- Shoulder pads: 1000 denier ballistic nylon
- D-rings: stainless steel; 2 bent D-ring on each shoulder (size M only 1 due to space limitations), 1 D-ring on each side of the waist; incl. stoppers
- Buckles: stainless steel waist buckle, acetyl resin engineered plastic shoulder buckles and sternum buckle
- Pivot rings at chest level for comfort, fit and load distribution
- 2 movable, stainless steel base plates for optimal shoulder strap placement
- Colour: black
- Sizes: M, L, XL, XXL
- Weight: M - 2lbs 7oz (1.10kg), LG - 2 lbs 8 oz (1.16kg), XL - 2 lbs 9 oz (1.16kg), XXL - 3 lbs (1.36kg)
- Warranty: 1 year limited manufacturer's warranty
- Ships within: 1-9 business days
- Useful links:
DIVE RITE library
DIVE RITE product registration
DIVE RITE 2" CROTCH STRAP
Sold Out
- This 2inch wide crotch strap is 42inches/106.6cm long and has a 2,800lbs tensile strength. Wide crotch straps are preferred by divers who use scooters (DPVs) for extended periods of time due to the added comfort the 2inch width provides.
The crotch strap is used for fastening a harness and backplate securely to a diver's body. It reduces the likelihood of gear slipping upwards on the body in the water, resulting in the tank hitting the back of the head during a dive.
A continuous piece of nylon webbing provides strength, yet is soft and won't dig into the body. This crotch strap includes a neoprene sleeve to protect your exposure suit from abrasion. -
- Type: crotch strap
- Material: nylon
- With: 2"/5cm
- Length: 42inches/106.6cm
- Strength: 2,800 lbs tensile strength
- D-rings: 1 at the front, 1 at the back with stopper
- Weight: 0.37lbs/170g
- Protective neoprene sleeve
- Ships within: 1-3 business days
- Useful links:
DIVE RITE library
DIVE RITE VIDEO: how to install crotch strap on backplate
DIVE RITE VIDEO: how to choose crotch strap
DIVE RITE BASIC HARNESS
$67.50
- For those who prefer a streamlined rig without buckles, chest strap or padding, the BASIC harness is a clean, simple harness intended for use with hard metal backplates.
2-inch (50mm) nylon webbing provides strength, yet is soft and won't dig into the body. The harness is adjustable by cutting off excess webbing once diver has sized the harness to his body stature. The standard 2-inch webbing also allows for customization with a wide variety of pockets and accessories, depending on the needs and desires of the individual diver.
Tubular webbing sleeves are included for all points where webbing comes into contact with the backplate to prevent abrasion.
Includes webbing and marine-grade stainless steel hardware. Does not include backplate and crotch strap. -
- Type: continuous nylon webbing harness for backplate
- Colour: black
- D-rings: stainless steel; 1 bent D-ring at each shoulder, 1 D-ring at each side of the waist; incl. stoppers
- Buckle: stainless steel waist buckle
- Stainless steel grommet for access to upper bolt hole
- Size: uni size
- Weight: 1lb/0.53kg
- Warranty: 1 year limited manufacturer's warranty
- Ships within: 1-3 business days
- Useful links:
DIVE RITE library
DIVE RITE product registration
DIVE RITE SINGLE TANK ADAPTER
$106.95
- Theoretically you can just attach 2 cam straps to most standard backplates and use them directly for diving in single tank configuration. But it is not always stable and often you end up with the tank slipping, not being parallel to your spine. This is makes correct trimming difficult and is shifting your hose routing during the dive.
DIVE RITE's SINGLE TANK ADAPTOR offers a secure and stable way to convert from double tank to single tank diving. It has been re-sized to fit squarely in the opening of DIVE RITE Travel and Voyager series wings. For divers who frequently switch between double tank and single tank rigs, our single tank adapter is a convenient way to attach cam straps even to a hard metal backplate that does not have tank band slots. It is constructed of marine grade 304 stainless steel and includes two rubber non-slip cam strap pads and all hardware required to mount the adapter to a backplate.
PLEASE NOTE: cam straps are not included. You can find them here. -
- Type: single tank adaptor
- Material: marine grade 304 stainless steel
- Size: 13-in x 3 3/8-in (33 cm x 8.5 cm)
- Weight: 13 oz (.37kg)
- Ships within: 1-3 business days
- Included: adaptor, 2 rubber pads, 2 mounting screws
- Useful links:
DIVE RITE library
DIVE RITE VIDEO: single tank adaptor
© 2024 getwetcanada. Powered by Shopify
