ZEAGLE F8
$899.95
- In partnership with Atomic Aquatics, ZEAGLE engineered over 20 different improvements on everything from inner mechanisms and materials to exterior controls and aesthetics. The F8 breathes better, works harder and lasts longer than any other regulator they’ve ever made.
1st stage: The F8 1st stage has a dry-sealed spring chamber (to stop freezing at water temperatures below 40 degrees F). All delicate parts of the 1st stage including the main spring are sealed behind the clear hydrostatic diaphragm away from the effects of salt or other contaminants in the water, making it environmentally sealed. It is very low in profile, barely extending above the tank valve, and places the low pressure hoses directly out to the sides, in a pattern preferred by many divers.
New Neoflon seat: The conical precision high-pressure valve provides much greater reliability and service life compared to conventional designs, while improving responsiveness and performance at all breathing rates.
Work of breathing at heavy* demand: 0.72 Joule/Liter *198 (60M) depth, 750 psi inlet, 62.5 RMV (liters per minute respiratory volume)
Like all Zeagle regulators, The Flathead-8 comes factory ready for use with EAN/ NITROX to 40% O2. -
2nd stage: A new inhalation diaphragm provides superior tear strength and improved response time to breathing (super soft silicone molded over a low friction disk). The improved exhaust valve ensures dryness and a lower exhalation effort.
Another revolutionary difference to most regulators is the seat-saving orifice. It is not screwed into its base, it can move. The sharp edge of the orifice is the part that is sealing against the teflon seat of the 2nd stage when you are not inhaling to stop the airflow. In common systems, when the reg is not used, these 2 parts are resting against each other, meaning the sharp edge of the orifice is cutting into the seat.
With the F8 these 2 parts don't rest on each other and the seat doesn't get used while in storage. Only when you turn on the tank (put air in the system) the flow of air will push the orifice against the seat, creating the seal.
The seat is made of soft silicone molded over a metal insert to deliver the firmness required for an airtight seal while maintaining the necessary elasticity to prevent leaking.
Redesigned front cover and inhalation effort control knob use co-molded components that provide the necessary grip, soft touch and ease of use.
The redesigned heat sink dramatically increases surface area thus aiding in the heat exchange necessary to avoid freeze-up. In addition the heat sink and inlet tube are zirconium-plated for superior corrosion resistance.
Several color kits are available for the F8 2nd stage to perfectly match your gear or mark different gasses. - Designed for cold water diving and Nitrox ready up to 40%
1st stage- Body material: marine-grade brass with black satin chrome finish
- Seat material: precision machined neoflon (PCTFE)
- Air-balanced diaphragm design
- Environmentally sealed
- 2 HP ports
- 5 LP ports
- Available in INT and DIN 300
- Weight: 1.2lbs/545g (DIN)
2nd stage- Air-balanced downstream valve
- Casing material: nylon 12
- Valve housing (barrel) material: 316 stainless steel
- Inhalation effort adjustment knob
- Venturi system (dive/pre-dive switch)
- Redesigned heat sink
- Compact and light design
- Colour kits available in: aqua, black, blue, pink, purple and red
Service interval: 12 months - Ships within: 1-4 business days.
All Zeagle regulators are covered by a limited lifetime warranty and include free parts for your annual service. Restrictions apply (valid for original owner and at regular service intervals)! For more details check Zeagle's warranty page.
Useful links:
ZEAGLE warranty
ZEAGLE product registration
ZEAGLE product manuals
Related Items
SCUBAPRO MK2 EVO/R195
$679.99
- This is a good entry-level reg for medium to warm water temperatures. It is a proven and reliable reg system, easy to maintain, easy to use and easy on the budget.
1st stage: The MK2 EVO is a downstream piston-style first stage. It comes with SCUBAPRO's patented Extended Thermal Insulating System (XTIS) fully isolating the mechanical elements of the first stage from the cold and hereby increasing freezing resistance by an average of 50 percent over the previous MK2 first stage.
A new spring insulating bushing and coating, insulating piston bushing, insulating sleeve and a new antifreeze cap contribute to the increase in freezing resistance.
Its body is 3.5mm smaller than its predecessor but houses an oversized piston by 1.6mm that provides better breathing performance by increasing airflow by 15 percent.
2nd stage: The R195 combines a classic downstream valve with a large diaphragm, functional purge button and VIVA switch for smooth and easy operation. It is a robust and reliable entry-level 2nd stage with reversible hose attachment. -
Nitrox ready up to 40%
1st stage- Body material: marine-grade, chrome-plated brass
- Classic downstream piston - unbalanced
- 1 HP ports
- 4 LP ports
- Available in INT and DIN 300
- Airflow at 2900psi: 3000 l/min = 106SCFM
- Intermediate pressure: 130-142psi/9-9.8bar
- Weight: INT: 1.56lbs/706g - DIN: 1lbs/454g
2nd stage- Classic downstream valve - unbalanced
- Valve housing (barrel) material: metal
- Venturi system (dive/pre-dive switch)
- Weight: 0.44lbs/198g (without hose)
- Airflow at 2900psi/200bar: 1400 l/ min = 50 SCFM
Service interval: 24 months or 100 dives - whichever comes first - Ships within: 1-4 business days.
All SCUBAPRO 1st and 2nd stages are covered by a limited lifetime warranty.
Useful links:
SCUBAPRO's regulator comparison chart
SCUBAPRO product registration
SCUBAPRO MK25 EVO/A700
$1,689.99
- The MK25 EVO/A700 combination is the best-breathing regulator in SCUBAPRO's line!
1st stage: Since its release in 2004 the MK25’s quickly made it to the very top of piston design regulators. It is very durable, reliable and delivers extra-high and effortless airflow, regardless of depth, tank pressure or breathing rate. Since 2016 the MK25 benefits from another substantial upgrade, SCUBAPRO's patented Extended Thermal Insulating System (XTIS), giving the reg its new name: MK25 EVO. The system let’s you enjoy all the advantages of an MK25 - regardless of how cold the water is! The XTIS makes this possible by fully isolating the mechanical elements of the first stage from the cold, increasing its freezing resistance 30 percent over the - already very freezing resistant - prior MK25 without compromising breathing performance. The key insulation system components are visible in blue.
New spring insulating coating, body insulating bushing, anti-freeze cap, bigger body and cap thread all work in concert with the XTIS to improve cold-water performance.
The MK25 EVO features a swivel turret with five high-flow LP ports (high flow ports deliver about 15 percent more air than conventional low pressure ports). It also has an external intermediate pressure adjustment that allows technicians to maintain peak performance without the need for disassembly.
2nd stage: the A700’s is an air-balanced regulator. Its casing is full metal to take advantage of the extremely high heat exchange rate which makes this second stage such a great choice for cold-water diving. In addition the metal case construction enables the use of a larger diaphragm inside a very compact casing for an ease of exhalation that is unmatched. The air-balanced system provides effortless breathing in any situation. - Designed for cold water diving and Nitrox ready up to 40%
1st stage- Body material: marine-grade, chrome-plated brass
- Patented XTIS (Extended thermal Insulating system)
- Air-balanced flow-through piston
- 2 HP ports
- 5 LP ports
- Swivelling turret head
- Available in INT and DIN 300
- Airflow at 2900psi: >8500 l/min = 301SCFM
- Intermediate pressure: 130-142psi/9-9.8bar
- Weight: INT: 1.74lbs/790g - DIN: 1.26lbs/572g
2nd stage- Air-balanced
- Casing material: nylon fiberglass
- Casing & Valve housing (barrel) material: metal
- Inhalation effort adjustment knob
- Venturi system (dive/pre-dive switch)
- Weight: 0.58lbs/265g (without hose)
- Airflow at 2900psi/200bar: 2000 l/min = 71SCFM
- Maximum low pressure: 203psi/14bar
Service interval: 24 months or 100 dives - whichever comes first - Ships within: 1-4 business days.
All SCUBAPRO 1st and 2nd stages are covered by a limited lifetime warranty.
Useful links:
SCUBAPRO's regulator comparison chart
SCUBAPRO product registration
SCUBAPRO MK25 EVO/A700 CARBON BLACK TECH
$2,339.99
- The MK25 EVO/A700 combination is the best-breathing regulator in SCUBAPRO's line. Both first and second stage have a BLACK TECH scratch- and corrosion-resistant coating that protects against the strains of technical diving and the ravages of salt water. This durable coating includes an inner layer of chemical Nickel (FDA approved) and an outer glossy DLC (Diamond Like Carbon) finish
1st stage: Since its release in 2004 the MK25’s quickly made it to the very top of piston design regulators. It is very durable, reliable and delivers extra-high and effortless airflow, regardless of depth, tank pressure or breathing rate. Since 2016 the MK25 benefits from another substantial upgrade, SCUBAPRO's patented Extended Thermal Insulating System (XTIS), giving the reg its new name: MK25 EVO. The system let’s you enjoy all the advantages of an MK25 - regardless of how cold the water is! The XTIS makes this possible by fully isolating the mechanical elements of the first stage from the cold, increasing its freezing resistance 30 percent over the - already very freezing resistant - prior MK25 without compromising breathing performance. The key insulation system components are visible in blue.
New spring insulating coating, body insulating bushing, anti-freeze cap, bigger body and cap thread all work in concert with the XTIS to improve cold-water performance.
The MK25 EVO features a swivel turret with five high-flow LP ports (high flow ports deliver about 15 percent more air than conventional low pressure ports). It also has an external intermediate pressure adjustment that allows technicians to maintain peak performance without the need for disassembly.
2nd stage: ike the original A700, the A700 CARBON's casing is full metal to take advantage of the extremely high heat exchange rate which makes this second stage such a great choice for cold-water diving. The metal case construction enables the use of a larger diaphragm inside a very compact casing for an ease of exhalation that is unmatched.
The screw-down front cover, in place of metal, is hand-made out of carbon fiber - the same material you find on aircraft and high-speed race cars. Carbon fiber is extremely lightweight and, unlike metal that can change shape when dropped or struck against a hard object, carbon fiber can resist substantial shocks without damage.
An effortless breather... it's now just lighter and tougher. - Designed for cold water diving and Nitrox ready up to 40%
1st stage- Body material: marine-grade, chrome-plated brass with Black-Tech coating
- Patented XTIS (Extended thermal Insulating system)
- Air-balanced flow-through piston
- 2 HP ports
- 5 LP ports
- Swivelling turret head
- Available in INT and DIN 300
- Airflow at 2900psi: >8500 l/min = 301SCFM
- Intermediate pressure: 130-142psi/9-9.8bar
- Weight: INT: 1.74lbs/790g - DIN: 1.26lbs/572g
2nd stage- Air-balanced
- Casing material: nylon fiberglass
- Casing & Valve housing (barrel) material: metal
- front cover material: carbon fibre
- Inhalation effort adjustment knob
- Venturi system (dive/pre-dive switch)
- Weight: 0.51lbs/233g (without hose)
- Very compact
- Airflow at 2900psi/200bar: 2000 l/min = 71SCFM
- Maximum low pressure: 203psi/14bar
Service interval: 24 months or 100 dives - whichever comes first - Ships within: 1-4 business days.
All SCUBAPRO 1st and 2nd stages are covered by a limited lifetime warranty.
Useful links:
SCUBAPRO's regulator comparison chart
SCUBAPRO product registration
SCUBAPRO MK25 EVO/G260
$1,349.99
- This rugged reg system delivers solid breathing performance in all diving conditions and water temperatures. It is a great choice for technical divers, as the combination allows the greatest variety of hose routing to optimize your equipment configuration.
1st stage: Since its release in 2004 the MK25’s quickly made it to the very top of piston design regulators. It is very durable, reliable and delivers extra-high and effortless airflow, regardless of depth, tank pressure or breathing rate. Since 2016 the MK25 benefits from another substantial upgrade, SCUBAPRO's patented Extended Thermal Insulating System (XTIS), giving the reg its new name: MK25 EVO. The system let’s you enjoy all the advantages of an MK25 - regardless of how cold the water is! The XTIS makes this possible by fully isolating the mechanical elements of the first stage from the cold, increasing its freezing resistance 30 percent over the - already very freezing resistant - prior MK25 without compromising breathing performance. The key insulation system components are visible in blue.
New spring insulating coating, body insulating bushing, anti-freeze cap, bigger body and cap thread all work in concert with the XTIS to improve cold-water performance.
The MK25 EVO features a swivel turret with five high-flow LP ports (high flow ports deliver about 15 percent more air than conventional low pressure ports) for optimal hose routing. It also has an external intermediate pressure adjustment that allows technicians to maintain peak performance without the need for disassembly.
2nd stage: The G260 SCUBAPRO is air balanced for easy breathing at all times and made of a rugged, nylon fiberglass casing with freeze-resistant components, fitted with a dark anodized aluminum ring. Inside you have metal components (inlet tube, orifice, inhalation control knob and hose connector) to ensure excellent cold-water performance. It also offers a left-right hose attachment option, making it a great choice for tech diving configurations. - Designed for cold water diving and Nitrox ready up to 40%
1st stage- Body material: marine-grade brass
- Patented XTIS (Extended thermal Insulating system)
- Air-balanced flow-through piston
- 2 HP ports
- 5 LP ports
- Swivelling turret head
- Available in INT and DIN 300
- Airflow at 2900psi: >8500 l/min = 301SCFM
- Intermediate pressure: 130-142psi/9-9.8bar
- Weight: INT: 1.74lbs/790g - DIN: 1.26lbs/572g
2nd stage- Air-balanced
- Casing material: nylon fiberglass
- Valve housing (barrel) material: metal
- Inhalation effort adjustment knob
- Venturi system (dive/pre-dive switch)
- Anodized aluminium heat sink
- Left-right hose attachment
- Weight: 0.6lbs/275g (without hose)
- Airflow at 2900psi/200bar: 1800 l/ min = 64 SCFM
- Maximum low pressure: 203psi/14bar
Service interval: 24 months or 100 dives - whichever comes first - Ships within: 1-4 business days.
All SCUBAPRO 1st and 2nd stages are covered by a limited lifetime warranty.
Useful links:
SCUBAPRO's regulator comparison chart
SCUBAPRO product registration
© 2024 getwetcanada. Powered by Shopify
