A Surface Marker Buoy (SMB) is a safety device that all divers should carry on every dive. The SMB allows divers to mark their location when making safety stops, completing decompression stops or signaling boats if they surface away from the boat. It also allows shore divers to mark their location.
The 61" high, 8" wide HOLLIS SURFACE MARKER BUOY is designed in high visibility orange with a 1" wide reflective band running around the top area so it can be easily seen from a distance. The inflator is made of robust metal and is easy to use: the buoy can be filled orally or connected to an inflator hose. When not pushing on the valve it stays locked to prevent accidental deflation. To prevent bursting through over-inflation as the buoy ascends an overpressure valve is integrated. The buoy can be easily attached via the nylon webbing with integrated stainless steel clip at the bottom of the tube.
The buoy is made of rupture resistant nylon with a TPU coating for added strength. A bungee keeps the buoy neatly rolled up when not in use. The included bag can be either attached to a harness webbing via the webbing loop at the back of the pouch or clipped via 2 stainless steel grommets. A smaller grommet at the bottom of the bag makes sure water exits easily when back at the surface.
Buoy type: surface marker buoy (SMB)
Material: nylon with TPU coating
Size: 61" high, 8" wide
Color: high visibility orange
Clear plastic slip at the top of tube to insert fluorescent stick or strobe
Reflective band around the top area of the buoy
Robust metal inflator (oral or inflator use)
Bungee wrapper to keep buoy together when not in use
Webbing with stainless steel clip at bottom of buoy
Nylon pouch with draining grommet, 2 clip grommets and webbing loop at the back
The AKONA double blade line cutter was developed for divers, mariners, mountaineers, extreme sports adventurers and rescue service providers who demand a tool that delivers a swift, safe, efficient cut. The ergonomic design provides a clean, sharp and effortless cutting action. The double sided blade can cut through thick lines or car seat belts.
The line cutter fits securely into the nylon pouch and uses a Velcro lanyard to prevent the line cutter from accidentally deploying. The pouch can be mounted on any webbing up to 2-inches (5.08 cm) wide.
The Dive Rite Line Cutter is the cutting tool that every diver should carry. Sharper than a standard dive knife, the line cutter uses a 420 surgical grade stainless steel blade that can easily cut thru braided line, monofilament, or any other line entanglement. The line cutter is designed with a hole in the body to provide a point to better grip the cutter, even for divers wearing gloves.
Housed in a heavy-duty fiber reinforced nylon body, the blade is easily removed for cleaning and replacement. The line cutter fits securely into the 4 1/2" x 2 1/2" (11.4cm x 6.4cm) nylon pouch and uses a Velcro lanyard to prevent the line cutter from accidentally deploying. The pouch is equipped with 2 Velcro straps, allowing it to be mounted horizontally or vertically on webbing up to 2-inches (5.08 cm) wide.
Be sure to thoroughly rinse the line cutter and pouch and allow to air dry after each use.
AL250: This is a truly multi-functional LED outdoor light and can be used on land and underwater. You can use it for diving, hiking, running, camping, fishing, etc. It comes in five great color options to choose from, includes a lanyard and only uses 2 AA batteries (not included).