Dive Rite
Recreational and technical dive gear by Dive Rite.
DIVE RITE 1" CROTCH STRAP
$12.85
- Preferred by most divers for its general comfort, the 1-inch crotch strap is ideal for fastening a harness and backplate securely to a diver's body. By using a crotch strap, divers can reduce the likelihood of their gear slipping upwards on the body in the water, resulting in the tank hitting the back of the head during a dive.
Nylon webbing provides strength, yet is soft and won't dig into the body. The 1-inch (25mm) crotch strap comes with a slide release buckle and scooter ring for divers who scooter and want the convenience of a crotch strap that can be adjusted easily. -
- Type: crotch strap
- Material: nylon
- Width: 1inch/25mm
- Length: 38inch/96.5cm
- Strength: 2,200 lbs tensile strength
- Delrin engineered plastic quick release buckle
- Scooter-rings: 1, stainless steel
- Weight: 3oz/85g
- Ships within: 1-3 business days
- Useful links:
DIVE RITE library
DIVE RITE VIDEO: how to install crotch strap on backplate
DIVE RITE VIDEO: how to choose crotch strap
DIVE RITE 2" CROTCH STRAP
Sold Out
- This 2inch wide crotch strap is 42inches/106.6cm long and has a 2,800lbs tensile strength. Wide crotch straps are preferred by divers who use scooters (DPVs) for extended periods of time due to the added comfort the 2inch width provides.
The crotch strap is used for fastening a harness and backplate securely to a diver's body. It reduces the likelihood of gear slipping upwards on the body in the water, resulting in the tank hitting the back of the head during a dive.
A continuous piece of nylon webbing provides strength, yet is soft and won't dig into the body. This crotch strap includes a neoprene sleeve to protect your exposure suit from abrasion. -
- Type: crotch strap
- Material: nylon
- With: 2"/5cm
- Length: 42inches/106.6cm
- Strength: 2,800 lbs tensile strength
- D-rings: 1 at the front, 1 at the back with stopper
- Weight: 0.37lbs/170g
- Protective neoprene sleeve
- Ships within: 1-3 business days
- Useful links:
DIVE RITE library
DIVE RITE VIDEO: how to install crotch strap on backplate
DIVE RITE VIDEO: how to choose crotch strap
DIVE RITE ADVANCED OPEN WATER COMBO
$980.99
- The XT Advanced Open Water Regulator Package draws from our technical roots, for a regulator setup that any diver can appreciate. The XT Advanced Open Water Regulator Package consists of our XT1 High Performance First Stage, a matched set of XT2 Balanced Second Stages, and a Mini Tech 2" SPG. Along with all of the main components, accessories such as clips and necklaces are included.
With its optimal hose routing, there are no dangling hoses to get snagged on the dive. The primary second stage is routed under the divers arm on a 40" flex hose with an angled adapter. This routing keeps the hose from flaring out and the longer hose allows for comfortable air sharing in an emergency situation. The backup second stage is on a 22" flex hose with necklace to be quickly accessed if needed. The high quality Mini Tech 2" Brass SPG is on a 32" flex hose with boot and stainless clip to be attached on the waist or chest D-ring for easy viewing.
For transporting your XT Advanced Open Water Regulator Package to and from the dive site, a carrying bag is included.
Watch the XT AOW-Combo video - Designed for cold water diving and Nitrox ready up to 40%
1st stage- Body material: marine-grade, black-chrome-plated brass
- Diaphragm system
- 2 HP ports, 3/8" thread
- 4 LP ports, 7/16" thread
- Available in INT and DIN 300
- Weight DIN: 1.8/820g
2nd stage- Air-balanced
- Casing material: ABS plastic
- Valve housing (barrel) material: stainless steel
- Inhalation effort adjustment knob
- Venturi system (dive/pre-dive switch)
- Anodized aluminium heat sink
- Left-right hose attachment
- Weight: 0.65lbs/250g (without hose)
Service interval: 24 months or 100 dives - whichever comes first
Warranty: limited lifetime manufacturer's warranty -
- XT1 First Stage (DIN or YOKE)
- XT2 Second Stage, Carbon Fiber cover
- XT2 Second Stage, Yellow cover
- 40-inch LP hose
- 22-inch LP hose
- Right angle regulator adapter
- Regulator necklace
- 2-inch SPG with 32-inch hose (PSI or BAR)
- Small swivel bolt snap
- Hose clip retainer
- Regulator Bag
-
Ships within: 1-10 business days. The reg set qualifies for free shipping within Canada! Restrictions apply, but very few. Please check our Shipping Policies for details.
Useful links: DIVE RITE product registration
DIVE RITE BACKPLATE COMFORT PAD
$106.99
- The Backplate Comfort Pad's high-tech design consists of molded foam contoured in all the right places to prevent uncomfortable pokes and prods when wearing a metal backplate. Mesh airflow channels provide instant draining topside and resist compression allowing the pad to maintain its thickness and comfort at depth. Using Velcro straps to secure to the shoulders of a harness, the Backplate Comfort Pad can be easily added or removed without the need to disassemble the harness. It will fit any standard backplate or harness.
-
- Material: 1000 denier ballistic nylon over quick-dry foam padding
- Weight: 6oz/170g
- Size: 10.5 inches wide x 16-inches high (27cm x 41)
- Fits any standard backplate
- Warranty: 1 year limited manufacturer's warranty
- Ships within: 1-3 business days
- Useful links:
DIVE RITE library
DIVE RITE product registration
DIVE RITE BASIC HARNESS
$67.50
- For those who prefer a streamlined rig without buckles, chest strap or padding, the BASIC harness is a clean, simple harness intended for use with hard metal backplates.
2-inch (50mm) nylon webbing provides strength, yet is soft and won't dig into the body. The harness is adjustable by cutting off excess webbing once diver has sized the harness to his body stature. The standard 2-inch webbing also allows for customization with a wide variety of pockets and accessories, depending on the needs and desires of the individual diver.
Tubular webbing sleeves are included for all points where webbing comes into contact with the backplate to prevent abrasion.
Includes webbing and marine-grade stainless steel hardware. Does not include backplate and crotch strap. -
- Type: continuous nylon webbing harness for backplate
- Colour: black
- D-rings: stainless steel; 1 bent D-ring at each shoulder, 1 D-ring at each side of the waist; incl. stoppers
- Buckle: stainless steel waist buckle
- Stainless steel grommet for access to upper bolt hole
- Size: uni size
- Weight: 1lb/0.53kg
- Warranty: 1 year limited manufacturer's warranty
- Ships within: 1-3 business days
- Useful links:
DIVE RITE library
DIVE RITE product registration
DIVE RITE CAM STRAPS
$32.99
- Dive Rite cam straps are available in several options. No matter what the application is, Dive Rite has a cam strap that will work for it. Nylon rollers on the cam strap protect the cylinder from being scratched by the buckle, while a rubber non-slip pad prevents the cylinder from shifting once the cam buckle has been secured. Excess webbing is secured using Velcro, which will also prevent the buckle from accidental opening. All cam straps are sold individually.
BC2035: a stainless steel roller buckle with a 2-inch wide nylon webbing. 36 inch (91.4cm) webbing length, suitable for cylinders from 6.9 inches (17.5cm) to 8 inches (20.3cm) in diameter, which includes them most popular sizes of cylinders. This cam strap comes standard on all Transpac XT, VoyagerPac, and TravelPac systems.
Also available in 2 additional lengths:- Short: 28 inch (71.1cm) length of webbing for use on cylinders with a diameter of 6 inches (15.2cm) or smaller.
- Double-long: 52 inch (132cm) length of webbing (includes 2 rubber non-slip pads).
BC2032: The 2-inch cam strap is also available with a plastic buckle. The plastic buckle is a popular option for applications where trimming every ounce possible from gear is necessary.
BC2036-1.5: a low profile marine grade stainless steel roller buckle with a low-profile, 1.5 inch nylon webbing. This cam strap is a popular option for rigging sidemount or stage bottles. 36 inches (91.4cm) in webbing length, suitable for cylinders from 5 inches in diameter up to 8 inches (20.3cm) in diameter.
-
BC2035:
- Lightweight, marine grade stainless steel buckle
- 36″ (91.4cm) length of 2″ webbing with 7,000 lb tensile strength
- Also available in SHORT (28 inch/71.1cm) and DOUBLE-LONG (52 inch/132cm)
- Weight: 11oz (311g)
BC2032:
- Lightweight plastic buckle
- 36″ (91.4cm) length of 2″ webbing with 7,000 lb tensile strength
- Also available in SHORT (28 inch/71.1cm) and DOUBLE-LONG (52 inch/132cm)
- Weight: 7.4oz (209.8g)
BC2036-1.5:
- Low profile marine grade stainless steel buckle
- 36″ (91.4cm) length of 1.5 inch nylon webbing.
- User adjustable length
- Weight: 6.2oz (175.7g)
- Useful links:
DIVE RITE library
DIVE RITE VIDEO: cam strap set up
DIVE RITE: 1.5-inch travel straps
DIVE RITE CLASSIC XT WING
$715.95
- The CLASSIC XT Wing (model BC 5400) is the workhorse of DIVE RITE's series of wings. With a history dating back to our early days, the Classic Wing has been dived and proven many times over, leading the way for divers to penetrate deep into caves, explore shipwrecks, or cruise comfortably deep on an ocean ledge. Designed solely for double tanks and with the option of a single or dual bladder, the CLASSIC XT provides 65lbs/27.2kg of lift, which can accommodate two 104ft3/17l back mounted cylinders and two 80ft3/11l stage bottles.
Supporting heavy doubles and stage bottles is one thing, but being able to properly balance and stabilize that amount of heavy gear for proper trim while swimming is where the CLASSIC XT really shines. The donut-shape design provides excellent stability and control while diving by keeping a volume of inflation on the top, sides, and bottom. This, along with an optional integrated Gusset Control System (GCS - bungee straps on 1 side of the wing that can be removed) that reduces “taco” effect, promotes effective streamlining and puts buoyancy where it is most needed (throughout the torso supporting the weight of the tanks) for superior horizontal trim. The GCS is not like a bungee wing because it does not restrict airflow; instead, the GCS promotes added streamlining and buoyancy control, yet allows the wing to inflate to its full capacity.
Designed to handle the extremes, the CLASSIC XT is built using the rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, along with a 1680 ballistic nylon diver's side panel. Inside the SuperFabric® outer shell a heavy-duty, 210 denier nylon laminated bladder enhances the ruggedness and superior performance of the CLASSIC XT.
The CLASSIC XT comes equipped with a choice of a 12- or 16-inch elbowed corrugated inflator hose or a 16-inch rapid exhaust (pull dump) along with an appropriate low-pressure inflation hose. It also has two sets of marine-grade 316 stainless steel grommet mounting holes for attaching the wing to a harness and set of tanks.
As a part of DIVE RITE's modular BCD system, the Classic XT can be matched with either a TransPac® XT, Transplate, or any metal back plate and webbing harness.
The Classic XT is backed by DIVE RITE's WORRY-FREE LIFETIME GUARANTEE and is made exclusively in the U.S.A. -
- Type: horseshoe wing
- Outside material: highly durable SuperFabric® brand technology material, 1680 denier ballistic nylon at the side panel
- Inner air cell: single, 210 denier nylon laminated bladder
- Lift: 65lbs/27.2 kg
- Cylinder accommodation: 2x104ft3/17l back mounted cylinders and two 80ft3/11l stage bottles
- Gusset Control System for streamlining
- Dump valves: 1, bottom left
- 3 choices of Power Inflators: 16inch corrugated hose with dump-pull mechanism, 16 or 12inch without dump-pull mechanism
- Grommets: 4, marine-grade 316 stainless steel
- Colour: black with grey side panel
- Product dry weight: 3lbs/1.36kg
- Approximate dimensions uninflated: 24-in. H x 26-in. W (60.9 cm x 66.0 cm)
- In the box: Classic wing with your choice of corrugated hose power inflator and LP inflator hose
- Warranty: limited lifetime warranty
- Ships within: 1-9 business days
- Useful links:
DIVE RITE product registration
DIVE RITE library
DIVE RITE VIDEO: how to install GCS
DIVE RITE VIDEO: SuperFabric XT Wing Series
DIVE RITE VIDEO: the though 210d inner bladder
DIVE RITE DELUXE HARNESS
$81.99
- A webbing harness designed for hard backplates that provides comfort and streamlining. Swivel points on the shoulder straps ensure a comfortable fit, which is especially important for women, as well as men with broad shoulders. A chest strap keeps the harness securely in place.
Two-inch (50mm) nylon webbing provides strength, yet is soft and won't dig into the body. Harness is adjustable by cutting off excess webbing once diver has sized the harness to his body stature. Standard two-inch webbing also allows for customization with a wide variety of pockets and accessories, depending on the needs and desires of the individual diver.
A Quick Release model with a buckle on the left shoulder is available (BC1080Q). Tubular webbing sleeves are included for all points where webbing will come into contact with the backplate to prevent abrasion.
Includes webbing, buckles and marine-grade stainless steel hardware. Does not include backplate and crotch strap. -
- Type: nylon webbing harness for backplate
- Width: 2"/5cm
- Length: upper part of harness 6ft, waist 3ft
- D-rings: stainless steel; 1 bent D-ring on each shoulder, 1 small D-ring on each shoulder, 1 D-ring on each side of the waist; incl. stoppers
- Buckles: stainless steel waist buckle, plastic sternum buckle, optional buckle on left shoulder
- Stainless steel grommet for access to upper bolt hole
- Colour: black
- Size: uni size
- Weight: 1.5lb/0.68kg
- Tensile strength: 2"/5.1cm webbing - 7000lbs/3175 kg, 1"/2.5cm webbing: 2200lbs/998kg
- Warranty: 1 year limited manufacturer's warranty
- Ships within: 1-3 business days
- Useful links:
DIVE RITE library
DIVE RITE product registration
DIVE RITE VIDEO: how to assemble a DELUX HARNESS
DIVE RITE LINE CUTTER
$45.00
- The Dive Rite Line Cutter is the cutting tool that every diver should carry. Sharper than a standard dive knife, the line cutter uses a 420 surgical grade stainless steel blade that can easily cut thru braided line, monofilament, or any other line entanglement. The line cutter is designed with a hole in the body to provide a point to better grip the cutter, even for divers wearing gloves.
Housed in a heavy-duty fiber reinforced nylon body, the blade is easily removed for cleaning and replacement. The line cutter fits securely into the 4 1/2" x 2 1/2" (11.4cm x 6.4cm) nylon pouch and uses a Velcro lanyard to prevent the line cutter from accidentally deploying. The pouch is equipped with 2 Velcro straps, allowing it to be mounted horizontally or vertically on webbing up to 2-inches (5.08 cm) wide.
Be sure to thoroughly rinse the line cutter and pouch and allow to air dry after each use. -
- Material: blade - 420 surgical grade stainless steel, pouch - heavy-duty fiber reinforced nylon
- Pouch size: 4 1/2" x 2 1/2" (11.4cm x 6.4cm)
- Weight: 1.8 oz (51 g)
- Attachment: via velcro on up to 2" webbing
- User changeable blade
- Comes with 2 spare blades
- Ships within: 1-3 business day
- Useful links:
DIVE RITE library
DIVE RITE video: Line Cutter
DIVE RITE PEE-VALVE
$172.95
A pee-valve (relief-valve) is a critical accessory for any drysuit diver, especially on long dives. Without a pee-valve, divers tend to intentionally dehydrated themselves to avoid the "urge" during an...
DIVE RITE QB WEIGHT POCKETS 20 lbs
$183.95
- The 20 lb Quick Buckle (QB) Weight Pockets consist of an insert pocket that easily releases when the handle is pulled and a holster that stays securely on the waist belt. Designed for use on the TransPac harness, they can be worn vertically or horizontally with each pocket holding up to 10 lbs of weight securely in position throughout the dive.
Simple, top-loading pocket protects divers from an inadvertent buoyancy event by keeping weight securely in place. Worn at an angle on the waist belt for easier access, the right hand pocket is identified by the Dive Rite logo while the left pocket is plain, without a logo. Tall and narrow, the 20 lb QB Weight Pockets leave plenty of room on the waist for other accessories, if desired.
-
- Type: quick-release weight pockets
- Weight capacity: 2x10lbs/4.54kg
- Material: 1680 denier ballistic nylon, buckle: acetyl
- Nickel plated brass grommets resist rust and corrosion
- Fits on up to 2" wide webbing
- Size: 9-in wide x 4.5-in high x 3-in deep (23 cm x 11 cm x 7.5 cm)
- Dry weight: 12 oz (340.2 g)
- Ships within: 1-3 business days
- Included: 2 weight pocket inserts and 2 weight pocket holsters
- Useful links:
DIVE RITE library
DIVE RITE VIDEO: how to add 16lbs weight pockets
DIVE RITE REC DUAL
$890.95
- A hybrid wing, the REC Series can be worn on single or double tanks making it one of DIVE RITE's most popular wings. When diving single tanks, DIVE RITE's Gusset Control System streamlines the wing, keeping it close to the body. This avoids the “taco” effect of the wing wrapping around the tank, away from the diver, which diminishes buoyancy control. Available in single or dual bladder, the REC Series has 45lbs/20.4 kg of lift and can accommodate two 85ft3/12 L back mounted cylinders.
Divers may choose from a durable 1680 ballistic nylon EXP material or an even more rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, with a 1680 ballistic nylon divers side panel. Both the REC EXP (Model BC4300) and REC XT (Model BC5300) are further enhanced with a heavy-duty, 210 denier nylon laminated bladder.
As a part of our modular BCD system, it can be matched with either a TransPac® XT, Transplate or any metal backplate and webbing harness. -
- Type: horseshoe wing
- Outside material: 1680 ballistic nylon (EXP) or SuperFabric® brand technology material (XT)
- Inner air cell: 2 separated, 210 denier nylon laminated bladders
- Lift: 45lbs/20.4 kg
- Dump valves: 2, one for each bladder
- 2 Power Inflators
- Grommets: 4, marine-grade 316 stainless steel
- Colour: black with grey side panel
- Approximate dimensions uninflated: 24-in H x 23-in W (60.9cm x 58.4cm)
- In the box: Rec wing with double bladder, 2 power inflators and 2 LP inflator hoses
- Warranty: limited lifetime warranty
- Ships within: 1-9 business days
- Useful links:
DIVE RITE product registration
DIVE RITE library
DIVE RITE VIDEO: SuperFabric XT Wing Series
DIVE RITE VIDEO: the though 210d inner bladder
DIVE RITE REC SERIES
$644.95
- A hybrid wing, the REC Series can be worn on single or double tanks making it one of DIVE RITE's most popular wings. When diving single tanks, DIVE RITE's Gusset Control System streamlines the wing, keeping it close to the body. This avoids the “taco” effect of the wing wrapping around the tank, away from the diver, which diminishes buoyancy control. Available in single or dual bladder, the REC Series has 45lbs/20.4 kg of lift and can accommodate two 85ft3/12 L back mounted cylinders.
Divers may choose from a durable 1680 ballistic nylon EXP material or an even more rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, with a 1680 ballistic nylon divers side panel. Both the REC EXP (Model BC4300) and REC XT (Model BC5300) are further enhanced with a heavy-duty, 210 denier nylon laminated bladder.
As a part of our modular BCD system, it can be matched with either a TransPac® XT, Transplate or any metal backplate and webbing harness. -
- Type: horseshoe wing
- Outside material: 1680 ballistic nylon (EXP) or SuperFabric® brand technology material (XT)
- Inner air cell: single, 210 denier nylon laminated bladder
- Lift: 45lbs/20.4 kg
- Dump valves: 1, bottom left
- 3 choices of Power Inflators: 16inch corrugated hose with dump-pull mechanism, 16 or 12inch without dump-pull mechanism
- Grommets: 4, marine-grade 316 stainless steel
- Colour: black with grey side panel
- Product dry weight: 3.12lbs/1.41kg
- Approximate dimensions uninflated: 24-in H x 23-in W (60.9cm x 58.4cm)
- In the box: Rec wing with your choice of corrugated hose and LP inflator hose
- Warranty: limited lifetime warranty
- Ships within: 1-9 business days
- Useful links:
DIVE RITE product registration
DIVE RITE library
DIVE RITE VIDEO: SuperFabric XT Wing Series
DIVE RITE VIDEO: the though 210d inner bladder
DIVE RITE SINGLE TANK ADAPTER
$106.95
- Theoretically you can just attach 2 cam straps to most standard backplates and use them directly for diving in single tank configuration. But it is not always stable and often you end up with the tank slipping, not being parallel to your spine. This is makes correct trimming difficult and is shifting your hose routing during the dive.
DIVE RITE's SINGLE TANK ADAPTOR offers a secure and stable way to convert from double tank to single tank diving. It has been re-sized to fit squarely in the opening of DIVE RITE Travel and Voyager series wings. For divers who frequently switch between double tank and single tank rigs, our single tank adapter is a convenient way to attach cam straps even to a hard metal backplate that does not have tank band slots. It is constructed of marine grade 304 stainless steel and includes two rubber non-slip cam strap pads and all hardware required to mount the adapter to a backplate.
PLEASE NOTE: cam straps are not included. You can find them here. -
- Type: single tank adaptor
- Material: marine grade 304 stainless steel
- Size: 13-in x 3 3/8-in (33 cm x 8.5 cm)
- Weight: 13 oz (.37kg)
- Ships within: 1-3 business days
- Included: adaptor, 2 rubber pads, 2 mounting screws
- Useful links:
DIVE RITE library
DIVE RITE VIDEO: single tank adaptor
DIVE RITE STAINLESS STEEL XT LITE BACKPLATE
$207.95
- The next generation of lightweight backplates has arrived. Dive Rite has taken the reliability of the stainless steel backplate and combined it with the light weight characteristics of non-stainless steel backplates. The new Dive Rite XT Lite is constructed from 16 guage 316L grade stainless steel, which is a low carbon, rust resistant grade of stainless. A series of cut-outs along the body of the plate reduce its overall weight while still maintaining the support needed for the heaviest of double cylinder configurations. All edges are laser cut, and individually finished by hand to ensure that there are no rough or jagged edges anywhere on the plate.
The XT BACKPLATE accommodates standard double tank bolt kits (11"/27.9cm distance); it has 2 mounting holes on the upper center part and a mounting slot on the bottom center part to adjust your tank hight. Two sets of 2" slots along the center allow divers to pass a cam strap and use the backplate for single tank diving without the need for a single tank adapter. A series of slots and holes along the outer edges of the backplate provide different options for mounting lights, pony bottles, lift bags, and other accessories. 2" (50mm) and 1" (25mm) slots at the bottom center of the plate allow for any crotch strap up to 2" (50mm) in width to be used. -
- Type: stainless steel backplate
- Weight: 2lbs 9.4oz/1.17kg
- Size: 10.5″/26.7cm (widest point) x 15″/39.4cm
- Depth: 1.25″/3.2cm (with contour)
- Warranty: 1 year limited manufacturer's warranty
- Ships within: 1-3 business days
- Useful links:
DIVE RITE library
DIVE RITE product registration
DIVE RITE TECH BUTTPLATE
$152.95
- When sidemounting stage tanks or rebreather bailout bottles, buttplate rails can be difficult to access if backmounted gear covers them up. Problem solved with our TECH BUTTPLATE.
It is made of reinforced nylon to provide the proper amount of rigidity to hold tanks in position and eliminate sag. Its rectangular shape places tank attachment points at the edge of the diver's body, while outrigger hardware is easy to find due to its orientation facing outwards on the plate. The TECH BUTTPLATE can be mounted to the harness by using either the two 2" webbing loops, or using two stainless steel assembly screws (included). TECH BUTTPLATE includes a 2" webbing loop for crotch strap routing. A total of 7 stainless steel grommets allow for several mounting options for accessories. -
- Type: buttplate
- Material: reinforced nylon
- Weight: 1.3lbs/590g
- Depth: 1.25″/3.2cm (with contour)
- 2 stainless steel handles
- 7 stainless steel grommets
- 2 stainless steel assembly screws for securing buttplate to backplate
- Accommodates any size crotch strap
- Warranty: 1 year limited manufacturer's warranty
- Ships within: 1-3 business days
- Useful links:
DIVE RITE library
DIVE RITE product registration
DIVE RITE THIGH/CYLINDER POCKET
$121.95
- Designed in a vertical fashion with a Velcro flap on the short edge of the pocket the Bellows Thigh/Cylinder Pocket w/Daisy Chain requires little space on a waist strap yet still allows you to carry everything you need on a dive and takes the worry out of losing your valuable gear. The pocket provides 3 separated spaces: a large internal pocket, a small, heavy-duty zipper compartment integrated in the velcro flap and a designated slate pocket on the backside of the main pocket.
Its technical design includes an innovative stretch band made of a special material used in bandages. This material has silicone strips on the inside of the band allowing the band to stretch and grip around your leg over any type of exposure suit or around a cylinder. It also attaches via a strap and buckle (at the top and bottom of the pocket) to a harness waist strap or cylinder neck allowing it to be positioned in the exact location desired. Attach one to your rig for items you need during the dive. Attach another to a decompression cylinder containing specialty items you want during decompression. It’s that versatile.
Created using webbing loops sewn to the pocket to form a chain (daisy chain) as used on backpacks in the hiking and mountaineering world, the loops allow for the attachment of our cutting device’s uniquely designed sheaths that clip directly into the daisy loops. Attach a line cutter, trauma sheers, or any tool to a daisy loop for quick and easy access.
Designed to provide maximum storage, the pocket can accommodate a full size lift bag with a spool. Need room for securing other items like line markers, a safety reel, dive tables, extra clips, Jon lines, cookies, a spare mouthpiece, or a backup light; the thigh pocket comes with a 36-inch (92 cm) looped lanyard attached to the inside of the pocket for attaching any piece of gear you need. No more fumbling for the right tools, just pull out the lanyard, unclip the tool you need, and stuff the lanyard and gear back inside the pocket.
Made with 1000 denier ballistic nylon fabric that is tear and abrasion resistant and with a Velcro flap closure, your gear stays secure in the pocket even when squeezing through a tight restriction or exploring deep inside a wreck. -
- Material: 1000 denier ballistic nylon
- Pocket orientation: Vertical style (opens on the short edge)
- Storage compartments: 3
- Closure: Velcro flap on the main compartment, a heavy-duty zipper on the flap compartment
- Attachment: leg band with silicone strips and buckle to attach to leg; strap and buckle to attach to harness waist strap or a cylinder band
- Nickel plated brass grommets on the bottom for drainage
- Internal depth: expands from 0.5 inch to 2.5 inch (1.3 cm to 6.35 cm)
- Size: 10 inch high x 6 inch wide x 2.25 inch deep (25 cm x 15 cm x 5.7 cm)
- Weight: 7.2oz/204g
- Warranty: 1 year limited manufacturer's warranty
- Ships within: 1-3 business days
- Useful links:
DIVE RITE library
DIVE RITE product registration
DIVE RITE TRANSPLATE HARNESS
$189.99
- A hybrid harness designed for divers who want the support of a backpack-style harness for better weight-load distribution, yet wish to dive a hard metal backplate.
Designed like a mountaineer's backpack, the TransPlate harness disperses weight across the hips and back, minimizing shoulder strain. When used with a 6-pound steel backplate, divers can remove or minimize weight.
Adjustable straps adapt to a wide variety of exposure suits, that means easy donning and doffing. Marine grade stainless steel base plates allow for proper placement of the shoulder straps. The plates can be moved forward or backward on the waist strap to get the best fit and performance. The modular design allows for customization with a wide variety of pockets and accessories. Available in sizes M - XXL.
Includes webbing, buckles and marine-grade stainless steel hardware. Does not include backplate, crotch strap and cam straps. -
- Type: padded nylon webbing harness with backplate
- Webbing width: 2"/5cm (1"/2.5cm for sternum strap)
- Webbing strength: 2"/5.1cm webbing - 7000lbs/3175 kg, 1"/2.5cm webbing: 2200lbs/998kg
- Shoulder pads: 1000 denier ballistic nylon
- D-rings: stainless steel; 2 bent D-ring on each shoulder (size M only 1 due to space limitations), 1 D-ring on each side of the waist; incl. stoppers
- Buckles: stainless steel waist buckle, acetyl resin engineered plastic shoulder buckles and sternum buckle
- Pivot rings at chest level for comfort, fit and load distribution
- 2 movable, stainless steel base plates for optimal shoulder strap placement
- Colour: black
- Sizes: M, L, XL, XXL
- Weight: M - 2lbs 7oz (1.10kg), LG - 2 lbs 8 oz (1.16kg), XL - 2 lbs 9 oz (1.16kg), XXL - 3 lbs (1.36kg)
- Warranty: 1 year limited manufacturer's warranty
- Ships within: 1-9 business days
- Useful links:
DIVE RITE library
DIVE RITE product registration
DIVE RITE TRAVEL EXP
$523.95
- A lightweight wing designed for single-tank, warm water diving, the TRAVEL series of wings is small-profile and ideal for travel and divers who wear a minimal amount of weight. At 25lbs/11.3 kg of lift, the TRAVEL wing can accommodate one 80ft3/12 L tank with no more than 16lbs of additional weight.
With its donut-shape, the TRAVEL wing provides greater stability and control in the water. Donut-style or 360 degree wings promote an even volume of inflation on top, sides and bottom, which improves buoyancy control and promotes a more efficient, horizontal trim.
The TRAVEL EXP is made from durable 1680 ballistic nylon EXP material (even more rugged SuperFabric® brand technology XT material available. Check the TRAVEL XT wing) with a heavy-duty, 210 denier nylon laminated bladder. It is backed by DIVE RITE's WORRY-FREE LIFETIME GUARANTEE and made exclusively in the U.S.A.
As a part of the modular BCD system, it can be matched with either a TransPac® XT, Transplate or any metal backplate and webbing harness. -
- Type: donut-shape, single-tank travel wing
- Outside material: 1680 ballistic nylon
- Inner air cell: single, 210 denier nylon laminated bladder
- Lift: 25lbs/11.3 kg
- Dump valves: 1, bottom left
- 3 choices of Power Inflators: 16inch corrugated hose with dump-pull mechanism, 16 or 12inch without dump-pull mechanism
- Max. tank size: 80ft3/12l tank
- Grommets: 4, marine-grade 316 stainless steel
- Colour: black with grey side panel
- On special order red or pink side panel color available. Please contact us.
- Product dry weight: 2.4lbs/1kg
- Approximate dimensions uninflated: 21.5-in H x 15-in W (54.6cm x 38.1cm)
- In the box: Travel wing with your choice of corrugated hose and LP inflator hose
- Warranty: limited lifetime warranty
- Ships within: 1-9 business days
- Useful links:
DIVE RITE product registration
DIVE RITE library
DIVE RITE VIDEO: the though 210d inner bladder
DIVE RITE TRAVEL TX
$613.95
- A lightweight wing designed for single-tank, warm water diving, the TRAVEL series of wings is small-profile and ideal for travel and divers who wear a minimal amount of weight. At 25lbs/11.3 kg of lift, the TRAVEL wing can accommodate one 80ft3/12 L tank with no more than 16lbs of additional weight.
With its donut-shape, the TRAVEL wing provides greater stability and control in the water. Donut-style or 360 degree wings promote an even volume of inflation on top, sides and bottom, which improves buoyancy control and promotes a more efficient, horizontal trim.
The TRAVEL XT is made from rugged SuperFabric® brand technology XT material which creates an armor-clad outer shell that is impervious to damaging pinches and cuts. The heavy-duty, 210 denier nylon laminated bladder is highly resistant to pinches and punctures. It is backed by DIVE RITE's WORRY-FREE LIFETIME GUARANTEE and made exclusively in the U.S.A.
As a part of the modular BCD system, it can be matched with either a TransPac® XT, Transplate or any metal backplate and webbing harness. -
- Type: donut-shape, single-tank travel wing
- Outside material: SuperFabric® brand technology XT material
- Inner air cell: single, 210 denier nylon laminated bladder
- Lift: 25lbs/11.3 kg
- Dump valves: 1, bottom left
- 3 choices of Power Inflators: 16inch corrugated hose with dump-pull mechanism, 16 or 12inch without dump-pull mechanism
- Max. tank size: 80ft3/12l tank
- Grommets: 4, marine-grade 316 stainless steel
- Colour: black with grey side panel
- Product dry weight: 2.4lbs/1kg
- Approximate dimensions uninflated: 21.5-in H x 15-in W (54.6cm x 38.1cm)
- In the box: Travel wing with your choice of corrugated hose and LP inflator hose
- Warranty: limited lifetime warranty
- Ships within: 1-9 business days
- Useful links:
DIVE RITE product registration
DIVE RITE library
DIVE RITE VIDEO: SuperFabric XT Wing Series
DIVE RITE VIDEO: the though 210d inner bladder
DIVE RITE TRAVEL WEIGHT POCKET
$43.99
- Made from tear and abrasion resistant 1680 denier ballistic nylon fabric, this versatile pocket holds up to 4lbs of weight, which is ideal for those traveling to warm water destinations or divers who add weight to tanks for trim purposes. With a small footprint of 3 inches x 4 inches (7.6cm x 10cm), you'll hardly know it's there.
A nickel plated brass grommet resists rust and corrosion and allows water to drain fast. The pocket can be attached either with the 2" overlapping velcro for quick placement or removal or more permanently with the 2" nylon webbing loop at the back of the pocket. -
- Type: trim weight pocket
- Material: tear and abrasion resistant 1680 denier ballistic nylon; buckle: acetyl
- Weight capacity: 4lbs (1.81kg)
- Attachment: via velcro or 2" nylon loop
- Nickel plated brass grommet resists rust and corrosion and drains water fast
- Size: 3 inches x 4 inches (7.6cm x 10cm)
- Ships within: 1-3 business days
- Included: 1 pocket
- Useful links:
DIVE RITE library
DIVE RITE XT 1
$275.99
- The XT Regulator welcomes a new generation of regulator performance at Dive Rite. An elite performer in any dive condition, the XT's advanced, patented design earns top marks from Mike Ward of Dive Lab. With work of breathing at less than 1.0 J/l, the XT performs right alongside premier regulators on the market today.
The XT is Nitrox ready for mixes up to 40% O2.
1st stage - XT1:The balanced first stage provides consistent gas flow regardless of depth and tank pressure. The completely environmentally sealed diaphragm design protects against internal corrosion, contaminants and freeze.
2nd stage - XT2: Of course also the 2nd stage is pneumatically balanced to give consistent gas pressure for easy inhalation. An adjustable design helps the diver to fine tune cracking pressure so breathing resistance matches the diver's personal preference.
The venturi-system directs airflow from the valve directly to the mouthpiece producing smooth inhalation and directs airflow away from the mouthpiece while resting at the surface. It can be adjusted by a dive/pre-dive switch that is easily operated even with bulky gloves.
The hose can be attached either on the right or the left side of the reg making it the perfect choice for sidemount dive configuration.
A deflection ring works to maximize performance while deterring free flow. - Designed for cold water diving and Nitrox ready up to 40%
1st stage- Body material: marine-grade, black-chrome-plated brass
- Diaphragm system
- 2 HP ports, 3/8" thread
- 4 LP ports, 7/16" thread
- Available in INT and DIN 300
- Weight DIN: 1.8/820g
2nd stage- Air-balanced
- Casing material: ABS plastic
- Valve housing (barrel) material: stainless steel
- Inhalation effort adjustment knob
- Venturi system (dive/pre-dive switch)
- Anodized aluminium heat sink
- Left-right hose attachment
- Weight: 0.65lbs/250g (without hose)
Service interval: 24 months or 100 dives - whichever comes first
Warranty: limited lifetime manufacturer's warranty -
Ships within: 1-4 business days (10 business days for the YOKE version and the octopus). The reg set qualifies for free shipping within Canada! Restrictions apply, but very few. Please check our shipping policies for details.
Useful links: DIVE RITE product registration
DIVE RITE XT2
$231.99
- The XT Regulator welcomes a new generation of regulator performance at Dive Rite. An elite performer in any dive condition, the XT's advanced, patented design earns top marks from Mike Ward of Dive Lab. With work of breathing at less than 1.0 J/l, the XT performs right alongside premier regulators on the market today.
The XT is Nitrox ready for mixes up to 40% O2.
This 2nd stage is pneumatically balanced to give consistent gas pressure for easy inhalation. An adjustable design helps the diver to fine tune cracking pressure so breathing resistance matches the diver's personal preference.
The venturi-system directs airflow from the valve directly to the mouthpiece producing smooth inhalation and directs airflow away from the mouthpiece while resting at the surface. It can be adjusted by a dive/pre-dive switch that is easily operated even with bulky gloves.
The hose can be attached either on the right or the left side of the reg making it the perfect choice for sidemount dive configuration.
A deflection ring works to maximize performance while deterring free flow. -
- Designed for cold water
- Air-balanced
- Casing material: ABS plastic
- Valve housing (barrel) material: stainless steel
- Inhalation effort adjustment knob
- Venturi system (dive/pre-dive switch)
- Anodized aluminium heat sink
- Left-right hose attachment
- Nitrox ready up to 40%
- Warranty: limited lifetime manufacturer's warranty
- Service interval: 24 months or 100 dives - whichever comes first
- Weight: 0.65lbs/250g (without hose)
-
Ships within: 1-4 business days (10 business days for the YOKE version and the octopus).
Useful links: DIVE RITE product registration
DIVE RITE XT2 OCTOPUS
$275.99
- The XT Regulator welcomes a new generation of regulator performance at Dive Rite. An elite performer in any dive condition, the XT's advanced, patented design earns top marks from Mike Ward of Dive Lab. With work of breathing at less than 1.0 J/l, the XT performs right alongside premier regulators on the market today.
The XT is Nitrox ready for mixes up to 40% O2.
This 2nd stage is pneumatically balanced to give consistent gas pressure for easy inhalation. An adjustable design helps the diver to fine tune cracking pressure so breathing resistance matches the diver's personal preference.
The venturi-system directs airflow from the valve directly to the mouthpiece producing smooth inhalation and directs airflow away from the mouthpiece while resting at the surface. It can be adjusted by a dive/pre-dive switch that is easily operated even with bulky gloves.
The octopus has a yellow front cover and comes with a 40" LP hose. -
- Designed for cold water
- Air-balanced
- Casing material: ABS plastic
- Valve housing (barrel) material: stainless steel
- Inhalation effort adjustment knob
- Venturi system (dive/pre-dive switch)
- Anodized aluminium heat sink
- Left-right hose attachment
- Nitrox ready up to 40%
- Warranty: limited lifetime manufacturer's warranty
- Service interval: 24 months or 100 dives - whichever comes first
- Weight: 0.65lbs/250g (without hose)
- Comes with 40" LP hose
-
Ships within: 1-4 business days (10 business days for the YOKE version and the octopus). The reg set qualifies for free shipping within Canada! Restrictions apply, but very few. Please check our shipping policies for details.
Useful links: DIVE RITE product registration
© 2024 getwetcanada. Powered by Shopify
