Zeagle
ZEAGLE CONSOLE SLIMLINE 2 · BAR/METER or PSI/FEET
$254.95
ZEAGLE gauges offer custom dial graphics that are large, easy to read and luminescent for better visibility in low light. Copper Beryllium spiral-wound rings ensure greater reliability and miniaturization, while the Bourdon...
ZEAGLE CONSOLE SLIMLINE 3 · BAR/METER or PSI/FEET
$389.95
ZEAGLE gauges offer custom dial graphics that are large, easy to read and luminescent for better visibility in low light. Copper Beryllium spiral-wound rings ensure greater reliability and miniaturization, while the Bourdon...
ZEAGLE DONUT BLADDER 30lbs
$444.95
- A heavy duty Cordura cover surrounds this 15 mil urethane inner bladder. Extended slots for positioning cam bands as well as various metal grommets make sure you can mount the bladder onto nearly any backplate in single tank or double tank configurations.
-
- Type: donut-shaped wing
- Outside material: Cordura
- Inner air cell: single, 15 mil urethane bladder
- Lift: 30lbs
- Inflator: positioned at top left with abrasion resistant sleeve
- Dump valves: 1, bottom left
- Grommets: 4
- Colour: black
- Approximate dimensions: 26" x 19" x 3" (66cm x 48cm x 7.6cm)
- In the box: Zeagle Donut Bladder with corrugated hose and LP inflator hose
- Warranty: limited lifetime warranty for the original owner if registered within 30 days of purchase
- Ships within: 1-7 business days
- Useful links:
ZEAGLE warranty
ZEAGLE product registration
ZEAGLE product manuals
ZEAGLE DONUT BLADDER 65lbs
$699.95
- A heavy duty Cordura cover surrounds this 15 mil urethane inner bladder. Extended slots for positioning cam bands as well as various metal grommets make sure you can mount the bladder onto nearly any backplate in single tank or double tank configurations.
-
- Type: donut-shaped wing
- Outside material: Cordura
- Inner air cell: single, 15 mil urethane bladder
- Lift: 65lbs
- Bungee retractors
- Inflator: positioned at top middle with abrasion resistant sleeve
- Dump valves: 2, bottom
- Grommets: 6
- Colour: black
- Approximate dimensions: 27" x 21" x 3" (68cm x 53cm x 7.6cm)
- In the box: Zeagle Donut Bladder with corrugated hose and LP inflator hose
- Warranty: limited lifetime warranty for the original owner if registered within 30 days of purchase
- Ships within: 1-7 business days
- Useful links:
ZEAGLE warranty
ZEAGLE product registration
ZEAGLE product manuals
ZEAGLE ENVOY II
$559.95
- The ENVOY II has a very good value/performance balance. It’s an economical regulator that doesn't compromise on performance or reliability. In function it basically is an ONYX II regulator without the cold water kit, black satin finish and without the inhalation effort adjustment knob on the 2nd stage.
The internal structure allows direct airflow through the 1st stage, providing lower turbulence for outstanding performance.
The high-pressure valve provides much greater reliability and service life compared to conventional designs, while improving responsiveness and performance at all breathing rates.
The braided LP hose provides high flow and tremendous abrasion resistance while having great flexibility. The compact exhaust tee and light weight construction give the ENVOY II a beautiful presence.
Like all ZEAGLE regulators, The ENVOY II comes factory ready for use with EAN/NITROX up to 40% O2. - Designed for water temperatures of 50°F/10°C or higher and Nitrox ready up to 40%
1st stage- Body material: marine-grade brass
- Air-balanced diaphragm design
- 2 HP ports
- 5 LP ports
- Available in INT and DIN 300
- Weight: 1.88lbs/0.89kg
2nd stage- Air-balanced downstream valve
- Casing material: thermoplastic
- Valve housing (barrel) material: 316 stainless steel
- Venturi system (dive/pre-dive switch)
- Weight: 0.42lbs/0.26kg (without hose)
Service interval: 12 months - Ships within: 1-4 business days.
All Zeagle regulators are covered by a limited lifetime warranty and include free parts for your annual service. Restrictions apply (valid for original owner and at regular service intervals)! For more details check Zeagle's warranty page.
Useful links:
ZEAGLE warranty
ZEAGLE product registration
ZEAGLE product manuals
ZEAGLE ENVOY II
$329.95
- The ENVOY II has a very good value/performance balance. It’s an economical regulator that doesn't compromise on performance or reliability. In function it basically is an ONYX II regulator without the cold water kit and black satin finish.
The internal structure allows direct airflow through the 1st stage, providing lower turbulence for outstanding performance.
The high-pressure valve provides much greater reliability and service life compared to conventional designs, while improving responsiveness and performance at all breathing rates.
Like all ZEAGLE regulators, The ENVOY II comes factory ready for use with EAN/NITROX up to 40% O2. -
- Designed for temperatures of 50°F/10°C or higher
- Nitrox-ready up to 40%
- Body material: marine-grade brass
- Air-balanced diaphragm design
- 2 HP ports
- 5 LP ports
- Available in INT and DIN 300
- Weight: 1.88lbs/0.89kg
- Service interval: 12 months
- Ships within: 1-4 business days. This item qualifies for free shipping within Canada! Restrictions apply, but very few. Please check our shipping policies for details.
All Zeagle regulators are covered by a limited lifetime warranty and include free parts for your annual service. Restrictions apply (valid for original owner and at regular service intervals)! For more details check Zeagle's warranty page.
Useful links:
ZEAGLE warranty
ZEAGLE product registration
ZEAGLE product manuals
ZEAGLE ENVOY II 2nd stage
$249.95
- The ENVOY II has a very good value/performance balance. It’s an economical regulator that doesn't compromise on performance or reliability. In function it basically is an ONYX II regulator without the inhalation effort adjustment knob.
The braided LP hose provides high flow and tremendous abrasion resistance while having great flexibility. The compact exhaust tee and light weight construction give the ENVOY II a beautiful presence.
Like all ZEAGLE regulators, The ENVOY II comes factory ready for use with EAN/NITROX up to 40% O2. -
- Air-balanced downstream valve
- Casing material: thermoplastic
- Valve housing (barrel) material: 316 stainless steel
- Venturi system (dive/pre-dive switch)
- Weight: 0.42lbs/0.26kg (without hose)
- Comes with 30" flex-hose
- Nitrox ready up to 40%
- Service Interval: 12 months
- Warranty: limited lifetime warranty
-
Ships within: 1-4 business days.
Useful links:
ZEAGLE warranty
ZEAGLE product registration
ZEAGLE product manuals
ZEAGLE ENVOY II OCTOPUS
$249.95
- The ENVOY II OCTOPUS has a very good value/performance balance. It’s an economical regulator that doesn't compromise on performance or reliability. In function it basically is an ONYX II regulator without the inhalation effort adjustment knob.
The braided LP hose provides high flow and tremendous abrasion resistance while having great flexibility. The compact exhaust tee and light weight construction give the ENVOY II a beautiful presence.
Like all ZEAGLE regulators, The ENVOY II comes factory ready for use with EAN/NITROX up to 40% O2. -
- Air-balanced downstream valve
- Casing material: thermoplastic
- Valve housing (barrel) material: 316 stainless steel
- Venturi system (dive/pre-dive switch)
- Weight: 0.42lbs/0.26kg (without hose)
- Comes with 36" yellow flex-hose
- Nitrox ready up to 40%
- Service Interval: 12 months
- Warranty: limited lifetime warranty
-
Ships within: 1-4 business days.
Useful links:
ZEAGLE warranty
ZEAGLE product registration
ZEAGLE product manuals
ZEAGLE F8
$899.95
- In partnership with Atomic Aquatics, ZEAGLE engineered over 20 different improvements on everything from inner mechanisms and materials to exterior controls and aesthetics. The F8 breathes better, works harder and lasts longer than any other regulator they’ve ever made.
1st stage: The F8 1st stage has a dry-sealed spring chamber (to stop freezing at water temperatures below 40 degrees F). All delicate parts of the 1st stage including the main spring are sealed behind the clear hydrostatic diaphragm away from the effects of salt or other contaminants in the water, making it environmentally sealed. It is very low in profile, barely extending above the tank valve, and places the low pressure hoses directly out to the sides, in a pattern preferred by many divers.
New Neoflon seat: The conical precision high-pressure valve provides much greater reliability and service life compared to conventional designs, while improving responsiveness and performance at all breathing rates.
Work of breathing at heavy* demand: 0.72 Joule/Liter *198 (60M) depth, 750 psi inlet, 62.5 RMV (liters per minute respiratory volume)
Like all Zeagle regulators, The Flathead-8 comes factory ready for use with EAN/ NITROX to 40% O2. -
2nd stage: A new inhalation diaphragm provides superior tear strength and improved response time to breathing (super soft silicone molded over a low friction disk). The improved exhaust valve ensures dryness and a lower exhalation effort.
Another revolutionary difference to most regulators is the seat-saving orifice. It is not screwed into its base, it can move. The sharp edge of the orifice is the part that is sealing against the teflon seat of the 2nd stage when you are not inhaling to stop the airflow. In common systems, when the reg is not used, these 2 parts are resting against each other, meaning the sharp edge of the orifice is cutting into the seat.
With the F8 these 2 parts don't rest on each other and the seat doesn't get used while in storage. Only when you turn on the tank (put air in the system) the flow of air will push the orifice against the seat, creating the seal.
The seat is made of soft silicone molded over a metal insert to deliver the firmness required for an airtight seal while maintaining the necessary elasticity to prevent leaking.
Redesigned front cover and inhalation effort control knob use co-molded components that provide the necessary grip, soft touch and ease of use.
The redesigned heat sink dramatically increases surface area thus aiding in the heat exchange necessary to avoid freeze-up. In addition the heat sink and inlet tube are zirconium-plated for superior corrosion resistance.
Several color kits are available for the F8 2nd stage to perfectly match your gear or mark different gasses. - Designed for cold water diving and Nitrox ready up to 40%
1st stage- Body material: marine-grade brass with black satin chrome finish
- Seat material: precision machined neoflon (PCTFE)
- Air-balanced diaphragm design
- Environmentally sealed
- 2 HP ports
- 5 LP ports
- Available in INT and DIN 300
- Weight: 1.2lbs/545g (DIN)
2nd stage- Air-balanced downstream valve
- Casing material: nylon 12
- Valve housing (barrel) material: 316 stainless steel
- Inhalation effort adjustment knob
- Venturi system (dive/pre-dive switch)
- Redesigned heat sink
- Compact and light design
- Colour kits available in: aqua, black, blue, pink, purple and red
Service interval: 12 months - Ships within: 1-4 business days.
All Zeagle regulators are covered by a limited lifetime warranty and include free parts for your annual service. Restrictions apply (valid for original owner and at regular service intervals)! For more details check Zeagle's warranty page.
Useful links:
ZEAGLE warranty
ZEAGLE product registration
ZEAGLE product manuals
ZEAGLE F8
$639.95
- In partnership with Atomic Aquatics, ZEAGLE engineered over 20 different improvements on everything from inner mechanisms and materials to exterior controls and aesthetics. The F8 breathes better, works harder and lasts longer than any other regulator they’ve ever made.
1st stage: The F8 1st stage has a dry-sealed spring chamber (to stop freezing at water temperatures below 40 degrees F). All delicate parts of the 1st stage including the main spring are sealed behind the clear hydrostatic diaphragm away from the effects of salt or other contaminants in the water, making it environmentally sealed. It is very low in profile, barely extending above the tank valve, and places the low pressure hoses directly out to the sides, in a pattern preferred by many divers.
New Neoflon seat: The conical precision high-pressure valve provides much greater reliability and service life compared to conventional designs, while improving responsiveness and performance at all breathing rates.
Like all Zeagle regulators, The Flathead-8 comes factory ready for use with EAN/ NITROX to 40% O2. -
- Designed for cold water diving
- Nitrox-ready up to 40%
- Body material: marine-grade brass with black satin chrome finish
- Seat material: precision machined neoflon (PCTFE)
- Air-balanced diaphragm design
- Environmentally sealed
- 2 HP ports
- 5 LP ports
- Available in INT and DIN 300
- Weight: 1.2lbs/545g (DIN)
- Service interval: 12 months
- Ships within: 1-4 business days. This item qualifies for free shipping within Canada! Restrictions apply, but very few. Please check our shipping policies for details.
All Zeagle regulators are covered by a limited lifetime warranty and include free parts for your annual service. Restrictions apply (valid for original owner and at regular service intervals)! For more details check Zeagle's warranty page.
Useful links:
ZEAGLE warranty
ZEAGLE product registration
ZEAGLE product manuals
ZEAGLE F8 2nd stage
$329.95
- The ZEAGLE F8 is a balanced 2nd stage made for diving in cold water.
The redesigned heat sink dramatically increases surface area thus aiding in the heat exchange necessary to avoid freeze-up. In addition the heat sink and inlet tube are zirconium-plated for superior corrosion resistance.
A new inhalation diaphragm provides superior tear strength and improved response time to breathing (super soft silicone molded over a low friction disk). The improved exhaust valve ensures dryness and a lower exhalation effort.
Another revolutionary difference to most regulators is the seat-saving orifice. It is not screwed into its base, it can move. The sharp edge of the orifice is the part that is sealing against the teflon seat of the 2nd stage when you are not inhaling to stop the airflow. In common systems, when the reg is not used, these 2 parts are resting against each other, meaning the sharp edge of the orifice is cutting into the seat.
With the F8 these 2 parts don't rest on each other and the seat doesn't get used while in storage. Only when you turn on the tank (put air in the system) the flow of air will push the orifice against the seat, creating the seal.
The seat is made of soft silicone molded over a metal insert to deliver the firmness required for an airtight seal while maintaining the necessary elasticity to prevent leaking.
Redesigned front cover and inhalation effort control knob use co-molded components that provide the necessary grip, soft touch and ease of use.
Several color kits are available for the F8 2nd stage to perfectly match your gear or mark different gasses. -
- Air-balanced
- Casing material: nylon 12
- Valve housing (barrel) material: 316 stainless steel
- Inhalation effort adjustment knob
- Venturi system (dive/pre-dive switch)
- Redesigned heat sink
- Compact and light design
- Comes with 30" flex-hose
- Nitrox ready up to 40%
- Service Interval: 12 months
- Warranty: limited lifetime warranty
- Colour kits available in: aqua, black, blue, pink, purple and red
-
Ships within: 1-4 business days. This item qualifies for free shipping within Canada! Restrictions apply, but very few. Please check our shipping policies for details.
Useful links:
ZEAGLE warranty
ZEAGLE product registration
ZEAGLE product manuals
ZEAGLE F8 OCTOPUS
$329.95
- The ZEAGLE F8 OCTOPUS is a balanced 2nd stage made for diving in cold water.
The redesigned heat sink dramatically increases surface area thus aiding in the heat exchange necessary to avoid freeze-up. In addition the heat sink and inlet tube are zirconium-plated for superior corrosion resistance.
A new inhalation diaphragm provides superior tear strength and improved response time to breathing (super soft silicone molded over a low friction disk). The improved exhaust valve ensures dryness and a lower exhalation effort.
Another revolutionary difference to most regulators is the seat-saving orifice. It is not screwed into its base, it can move. The sharp edge of the orifice is the part that is sealing against the teflon seat of the 2nd stage when you are not inhaling to stop the airflow. In common systems, when the reg is not used, these 2 parts are resting against each other, meaning the sharp edge of the orifice is cutting into the seat.
With the F8 these 2 parts don't rest on each other and the seat doesn't get used while in storage. Only when you turn on the tank (put air in the system) the flow of air will push the orifice against the seat, creating the seal.
The seat is made of soft silicone molded over a metal insert to deliver the firmness required for an airtight seal while maintaining the necessary elasticity to prevent leaking.
Redesigned front cover and inhalation effort control knob use co-molded components that provide the necessary grip, soft touch and ease of use.
Several color kits are available for the F8 2nd stage to perfectly match your gear or mark different gasses. -
- Air-balanced
- Casing material: nylon 12
- Valve housing (barrel) material: 316 stainless steel
- Inhalation effort adjustment knob
- Venturi system (dive/pre-dive switch)
- Redesigned heat sink
- Compact and light design
- Comes with 36" yellow flex-hose
- Nitrox ready up to 40%
- Service Interval: 12 months
- Warranty: limited lifetime warranty
- Colour kits available in: aqua, black, blue, pink, purple and red
-
Ships within: 1-4 business days. This item qualifies for free shipping within Canada! Restrictions apply, but very few. Please check our shipping policies for details.
Useful links:
ZEAGLE warranty
ZEAGLE product registration
ZEAGLE product manuals
ZEAGLE OCTO-Z II
$364.95
- The OCTO-Z II features a light yet rugged design. Both the quick connect and corrugated hose fittings rotate (even under pressure) for easy, comfortable placement of the Octo-Z’s body. The Octo-Z II can be disconnected from the corrugated hose and be replaced be a garden hose to easily rinse the BC’s inside.
The OCTO-Z II is available in black and yellow. Zeagle offers an adapter to convert the high-flow connector on your hose to a regular inflator connector to use a regular BC with your hose.
Our personal note: a 2-in-1 Octo-Inflator combination is generally used to have less hoses going off your 1st stage thus be more streamlined and to have your alternative air source always ready in a place where you are used to look for. During a dive the inflator is one of the most used pieces of your gear so you won’t have any problems finding your alternative air source should you ever need it. In case of emergency you simply pass on your main regulator to your buddy and breath from the Octo-Inflator yourself.
You are also saving a bit of weight when traveling but be aware that an Octo-Inflator has a different hose connector than most regular BCs and dive shops usually don’t rent gear to fit with an Octo-Inflator so be sure to bring adaptors for emergencies.
Like the buttons on a regular inflator the buttons of an Octo-Inflator can usually be differentiated by color and touch/shape thus improving safety when inflating or deflating the BC. Both buttons are positioned on top of the housing, making them easier to operate when breathing off the unit without having to change hand positions. The purge cover is flexible to easily purge the reg should you need to use it. The BC can still be orally inflated through the mouth piece like on any standart BC. -
- Type: 2-in-1 BC Inflator-Octopus
- 2nd stage design: classic downstream valve
- Casing material: Thermoplastic
- Connector: Zeagle high-flow quick connect
- Hose thread: 3/8"
- Fits 1" corrugated hose
- Corrugated hose disconnect
- Corrugated hose connection for rinsing
- Nitrox ready up to 40%
- Available colours: black, yellow
- Available adapters: Convert high-flow quick connect to regular inflator quick connect.
- Weight: 0.47lbs/213g (without hose)
- Hose length: 27”
- Service interval: simple inspection every 2 years and complete overhaul every other 2 years.
- Warranty: limited lifetime warranty
- Ships within: 1-4 business days. This item qualifies for free shipping within Canada! Restrictions apply, but very few. Please check our shipping policies for details.
Useful links:
ZEAGLE warranty
ZEAGLE product registration
ZEAGLE product manuals
OCTO-Z II video
ZEAGLE OCTO-Z to inflator adaptor
$39.95
"The OCTO-Z hose to Generic Inflator Hose Adaptor" allows a standard power inflator to be used with an OCTO-Z hose. This quick disconnect hose adaptor plugs into a ZEAGLE OCTO-Z hose and allows...
ZEAGLE ONYX II
$689.95
- When the ONYX first came out, it earned high marks as an easy-breathing reg. Now Zeagle added a dry-seal system to the first stage and a heat sink to the second stage, creating the ONYX II cold-water regulator.
The internal structure allows direct airflow through the 1st stage, providing lower turbulence for outstanding performance.
The high-pressure valve provides much greater reliability and service life compared to conventional designs, while improving responsiveness and performance at all breathing rates.
The braided LP hose provides high flow and tremendous abrasion resistance while having great flexibility. The compact exhaust tee, advanced black satin chrome finish and light weight construction give the ONYX a beautiful presence.
An anodized aluminum heat sink on the 2nd stage along with the external diaphragm on the 1st stage improves the cold water performance of the ONYX II regulator.
Work of breathing at heavy* demand: 0.95 Joule/Liter *198 (60M) depth, 750 psi inlet, 62.5 RMV (liters per minute respiratory volume)
Like all ZEAGLE regulators, The ONYX II comes factory ready for use with EAN/NITROX up to 40% O2. - Designed for cold water diving and Nitrox ready up to 40%
1st stage- Body material: marine-grade brass with black satin chrome finish
- Air-balanced diaphragm design
- Environmentally sealed and cold-water kit installed
- 2 HP ports
- 5 LP ports
- Available in INT and DIN 300
- Weight: 1.6lbs/730g (DIN)
2nd stage- Air-balanced downstream valve
- Casing material: thermoplastic
- Valve housing (barrel) material: stainless steel
- Inhalation effort adjustment knob
- Venturi system (dive/pre-dive switch)
- Anodized aluminum heat sink
- Weight: 0.6lbs/275g (without hose)
Service interval: 12 months - Ships within: 1-4 business days.
All Zeagle regulators are covered by a limited lifetime warranty and include free parts for your annual service. Restrictions apply (valid for original owner and at regular service intervals)! For more details check Zeagle's warranty page.
Useful links:
ZEAGLE warranty
ZEAGLE product registration
ZEAGLE product manuals
ZEAGLE ONYX II
$469.95
- When the ONYX first came out, it earned high marks as an easy-breathing reg. Now Zeagle added a dry-seal system to the first stage and a heat sink to the second stage, creating the ONYX II cold-water regulator.
The internal structure allows direct airflow through the 1st stage, providing lower turbulence for outstanding performance.
The high-pressure valve provides much greater reliability and service life compared to conventional designs, while improving responsiveness and performance at all breathing rates.
The braided LP hose provides high flow and tremendous abrasion resistance while having great flexibility.
Like all ZEAGLE regulators, The ONYX II comes factory ready for use with EAN/NITROX up to 40% O2. -
- Designed for cold water diving
- Nitrox-ready up to 40%
- Body material: marine-grade brass with black satin chrome finish
- Air-balanced diaphragm design
- Environmentally sealed and cold-water kit installed
- 2 HP ports
- 5 LP ports
- Available in INT and DIN 300
- Weight: 1.6lbs/730g (DIN)
- Service interval: 12 months
- Ships within: 1-4 business days. This item qualifies for free shipping within Canada! Restrictions apply, but very few. Please check our shipping policies for details.
All Zeagle regulators are covered by a limited lifetime warranty and include free parts for your annual service. Restrictions apply (valid for original owner and at regular service intervals)! For more details check Zeagle's warranty page.
Useful links:
ZEAGLE warranty
ZEAGLE product registration
ZEAGLE product manuals
ZEAGLE ONYX II 2nd stage
$269.95
- When the ONYX first came out, it earned high marks as an easy-breathing reg. Now Zeagle added a heat sink to the second stage, creating the ONYX II cold-water regulator.
The braided LP hose provides high flow and tremendous abrasion resistance while having great flexibility. The compact exhaust tee, advanced black satin chrome finish and light weight construction give the ONYX a beautiful presence.
Work of breathing at heavy* demand: 0.95 Joule/Liter *198 (60M) depth, 750 psi inlet, 62.5 RMV (liters per minute respiratory volume)
Like all ZEAGLE regulators, The ONYX II comes factory ready for use with EAN/NITROX up to 40% O2. -
- Air-balanced downstream valve
- Casing material: thermoplastic
- Valve housing (barrel) material: stainless steel
- Inhalation effort adjustment knob
- Venturi system (dive/pre-dive switch)
- Anodized aluminum heat sink
- Weight: 0.6lbs/275g (without hose)
- Comes with 30" flex-hose
- Nitrox ready up to 40%
- Service Interval: 12 months
- Warranty: limited lifetime warranty
Service interval: 12 months -
Ships within: 1-4 business days.
Useful links:
ZEAGLE warranty
ZEAGLE product registration
ZEAGLE product manuals
ZEAGLE ONYX II OCTOPUS
$269.95
- When the ONYX first came out, it earned high marks as an easy-breathing reg. Now Zeagle added a heat sink to the second stage, creating the ONYX II cold-water regulator.
The braided LP hose provides high flow and tremendous abrasion resistance while having great flexibility. The compact exhaust tee, advanced black satin chrome finish and light weight construction give the ONYX a beautiful presence.
Work of breathing at heavy* demand: 0.95 Joule/Liter *198 (60M) depth, 750 psi inlet, 62.5 RMV (liters per minute respiratory volume)
Like all ZEAGLE regulators, The ONYX II comes factory ready for use with EAN/NITROX up to 40% O2.
PLEASE NOTE: the regulator shown in the picture is the ONYX II 2nd stage. The OCTOPUS comes with more neon yellow accents! -
- Air-balanced downstream valve
- Casing material: thermoplastic
- Valve housing (barrel) material: stainless steel
- Inhalation effort adjustment knob
- Venturi system (dive/pre-dive switch)
- Anodized aluminum heat sink
- Weight: 0.6lbs/275g (without hose)
- Comes with 36" yellow flex-hose
- Nitrox ready up to 40%
- Service Interval: 12 months
- Warranty: limited lifetime warranty
Service interval: 12 months -
Ships within: 1-4 business days.
Useful links:
ZEAGLE warranty
ZEAGLE product registration
ZEAGLE product manuals
ZEAGLE PRESSURE GAUGE · BAR or PSI
$189.95
Zeagle gauges offer custom dial graphics that are large, easy to read and luminescent for better visibility in low light. Copper Beryllium spiral-wound rings ensure greater reliability and miniaturization, while the...
ZEAGLE RANGER
$1,119.95
The industry standard for rugged design, versatility, and comfort. If you want a tough recreational buoyancy system, and also want it to adapt and change to meet your different diving needs, the RANGER is a system you won't outgrow. It’s been at the "top of the charts" for many years.
The Ranger was the first BC to combine high quality heavy duty construction, weight integration and rear flotation. Its introduction created a new category of buoyancy systems and made it the most imitated BC in history. But its incredible versatility is what keeps knowledgeable divers recommending it year after year. Our modular construction allows the Ranger to transition between tropical travel diving, rugged cold water diving in wet or dry suits, single or twin cylinders, and even technical diving (with optional bladder assemblies having up to dual 85 lb lift redundant bladder assemblies and easily mounted backplates).
Use the practical Bx Coupler to rinse the inside of the bladder. Simply unscrew the Bx Coupler from the Power Inflator, and screw onto a standard garden hose.
Constructed of heavily reinforced 1050 denier ballistic nylon, the Ranger is compatible with a variety of options and accessories, including bladders, pockets, hard backplates, and custom gear attachment components.
Our personal note: All RANGER BCs are very durable, you will certainly be able to do hundreds of dives with either of them. The RANGERs are highly adjustable and you can configure them to your specific needs. We love them! We don't think it's the best solution as a permanent BC for using double tanks but it's a great option to have if you are using a double tank only occasionally.
ZEAGLE RANGER JR
$619.95
The RANGER JR is a quality BC made specifically for children. Using the same rugged construction as the legendary Ranger BC, the RANGER JR utilizes our Personal Fit System to let you change out specific sections of the BC so it can grow right along with your child.
The waist panel of the RANGER JR can be adjusted out to add several inches of growth room in the waist area. The shoulder section can be replaced with larger sections when the child starts inching up past the "knee high to a grasshopper" stage. Combined with the same quality in material and construction, this flexibility ensures this BC will last for many years, so you won’t have to buy a new BC after every growth spurt. (Unlike those running shoes.)
ZEAGLE RANGER LTD
$1,389.95
The new LTD now comes standard in Black, a good looking, rich color that compliments any suit or other gear color combination. The shoulder is designed with the new super duty Airloc buckle that will swivel to adjust the harness to the body’s contour to eliminate binding and restriction of movement at the chest and underarm areas.
With the addition of harness type webbing and a new threading arrangement the diver can easily add more D-rings and other accessories conveniently on the shoulder. This feature will now allow the technical and accessory minded diver to further set-up his BC to what he needs for the type of diving he is doing. We have also added a right-hand shoulder dump with a pull knob located conveniently on the inside edge of the right shoulder pad. The dump valve acts also as an additional safety overpressure valve.
Our personal note: All RANGER BCs are very durable, you will certainly be able to do hundreds of dives with either of them. The RANGERs are highly adjustable and you can configure them to your specific needs. We love them! We don't think it's the best solution as a permanent BC for using double tanks but it's a great option to have if you are using a double tank only occasionally.
© 2024 getwetcanada. Powered by Shopify
